How to Replace AirDoctor 5500 Filter
Replacing the AirDoctor 5500 filter is a really simple process that doesn’t take much effort. The AirDoctor 5000, AD5500, and AD5000 versions are essentially identical. New filters provide adequate airflow through a purifier and ensure proper operation of the purifying equipment in terms of dust and odor removal.
The following is the first step in replacing filters for folks seeking how to change AirDoctor filter replacement. First of all, you have to switch off the purifier and disconnect it from electricity. Then you may remove the side cover of the purifier and pull out the pre-filter, Premium Carbon VOC filter, and UltraHEPA filter. The filters include several tabs that make it easy to pull them out without a lot of effort.
Then you have to install the new Premium Carbon VOC and UltraHEPA filters in the gadget. The arrows on the filters indicate the appropriate installation direction. Therefore, it is necessary to verify the arrows on the filters before installation. It is not advisable to push the filters during installation. The pre-filter must be cleaned after installation, before placement into the machine.
Clean the pre-filter of dust, hair, and other particles with a vacuum cleaner. This is a small step, but it may have an influence on keeping a steady airflow. Therefore, during the normal maintenance of the AirDoctor, it is important to inspect and clean the pre-filter from time to time to avoid the dust layer from building up.
After the filters are in place, the machine's side cover must be put back on. First, the bottom tabs of the cover should fit into the holes, and then the cover should be fastened to the device with a delicate snapping action. If there are filters on each side of the purifier that require replacing, then the process should be repeated with the opposite side of the machine.
Once the replacement operation is done, you are ready to plug in your purifier and turn it on. The filter indicator lights may indicate the last filter state; thus, you will need to reset them. To do so, press the Auto and Dim buttons simultaneously for three seconds. Then the filter indicators will be reset.
Changing the filters ensures your air purifier functions properly. In addition, by changing the filter frequently, you avoid any limitation caused by heavy use of the filter. Genuine AirDoctor replacement filters are designed for use in compatible AirDoctor air purifiers. So you may choose them when it's time to replace them.

Comments
Post a Comment